Motorola TETRA MTM5400 User Manual

Procedure:
1 Perform one of the following actions:
• Press
End if your radio displays Emergency Mic On.
• Press and hold Exit.
NOTE: Press the End key if an Emergency Operation triggered by Emergency
number (not by Emergency button) to exit the Emergency Operation.
Your radio exits Emergency Operations.
3.6
Repeater Mode
NOTE: This is a Software Selling Feature. Repeater Mode does not apply to MTM5200 radio.
The Repeater Mode provides repeater connectivity between radios operating in the DMO Mode.
Figure 6: Repeater Mode Operation
DMODMO
When the radio is in DMO repeater mode, it extends the DMO range by retransmitting received
information from one radio to another. It retransmits group calls, private calls and data on a given
frequency. In the diagram, the radio in the middle serves as a repeater.
The repeater sends presence signal periodically on a free channel to allow other radios to synchronize
on a given frequency.
Only the radios on the same talkgroup can communicate with each other through the repeater.
The Repeater Mode is activated by selecting Menu→Networks→Repeater Mode.
3.6.1
Setting Monitor Option
Procedure:
1 From the home screen, press Options.
2 Press Monitor.
3 Select one of the following options:
68015000180-MR
Chapter 3 :
Modes
62

Motorola TETRA MTM5400 Specifications

General

Operating Temperature	-30°C to +60°C
IP Rating	IP54
Channels	Up to 1000
RF Power Output	10W
Frequency Bands	380-430 MHz, 806-870 MHz