Ajay16 Motorola v3 Disassembly Guide v1.1
Page: 1
Compiled Exclusively for MotoModders.net
MOTOROLA V3 DISASSEMBLY GUIDE
This guide will help you replace housing parts and get to the inner
parts of your phone. I am in no way responsible for any damage
occurred to your phone. If you follow what I say to do in this guide
you should be ok. But you need a lot of time and patience when
disassembling your phone.
YOU MUST READ EVERYTHING CAREFULLY!
!ONLY BUY HOUSINGS FROM CNN.CN, AS THEY ARE OEM!
Contents:
Steps 1 ~ 5 Facia Replacement.
Steps 1 ~ 13 Screen Replacement.
Step 20 ~ 37 Aerial Cover/Lower Front Housing Replacement.
Step 20 ~ 55 Keypad and Flex Replacement.
Step 62 ~ 64 Lens Replacement.
Page 28 ~ 29 Keypad Hardware Fix, What to do if you don’t have the
plastic frame on your facia, or the battery lock on your battery door:
Tools Needed:
Screwdrivers ~ T3, T4, T5, T6
Precision Tweezers
Mobile Phone Opening Tool
A pin
Brand new Glasses Cloth
Screw Sizes:
Screen Screws ~ T4
Rear Screws ~ T6
Mic Screws ~ T5
Right Flip Screw ~ T3
BEFORE YOU DO ANYTHING MAKE SURE YOU HAVE ALL OF
THE TOOLS NEEDED.
You can buy these from eBay or any other mobile phone website.
Take your time and don’t rush! Move away any drinks or liquid, and
have good light.
Right here we go!
To Next Page
Need help?
General
Weight and Dimensions
