Motorola XT460 User Manual

English
22
GETTING STARTED
GETTING STARTED
For the following explanations, refer to “Parts
Of The Radio” on page 9.
TURNING RADIO ON/OFF
To turn ON the radio, rotate the On/Off/Volume
Knob clockwise. The radio plays one of the
following:
• Power up tone and channel number
announcement, or
• Battery level and channel number
announcements, or
• Silent (Audible tones disabled)
The LED blinks red briefly.
To turn the radio OFF, rotate the On/Off/Volume
Knob counterclockwise until you hear a ‘click’
and the radio LED Indicator turns OFF.
ADJUSTING VOLUME
Turn the On/Off/Volume Knob clockwise to
increase the volume, or counterclockwise to
decrease the volume.
Note: Do not hold the radio too close to the ear
when the volume is high or when adjusting
the volume
READING THE DISPLAY
Note: The radio display shown here is for icon
location only. Each radio display may
appear different (channel and code) based
on the pre-programmed radio defaults and
features available in the model or region.
Pressing any button, except the PTT button,
will turn on the backlight.
Hi Power
Battery
Level
Channel
Indicator
Frequency
Indicator
Interference
Eliminator Code
Indicator
Keypad
Lock
Signal
Strength
Scramble
Vox /
iVox
Channel Number
Programming
Mode Indicator
Scan

Motorola XT460 Specifications

General

Brand	Motorola
Model	XT460
Category	Two-Way Radio
Language	English