68
MYSTIC LIGHT
Fast
Brightness
Slow
Darkness
y LED area selector - allows you to select the LED area on the device. The LED effects
vary depending on your LED area selection.
y Effect speed level - allows you to adjust the LED light effect switching speed. Please
note that this function will only be available if your device supports it.
Select more dots to increase the rate of change of
the effect and fewer dots to decrease the speed.
Select more dots to increase the
LED brightness and fewer dots to
decrease the LED brightness.
y Brightness level - allows you to adjust LED light brightness. Please note that this
function will only be available if your device supports it.
y Apply Button - Each time you change the
configurations, you need to click the Apply
button to apply changes.
y Device synchronization - In this section, you may synchronize LED light effect to your
devices.
To synchronize devices - click the chain icon under device icon, when the broken-
chain icon changes to the red-chain icon, the device has synchronized the LED
effect settings with the other devices.
Red-chain icon - indicates the
device has been synchronized.
Broken-chain icon - indicates the
device is not synchronized.
Device icon - click it to enter the device LED effect setting
screen. When it is turn red, it indicates the device you’re
currently setting.
Individual - You can also change settings for single device. To do that, click the
chain icon and turn the color to gray as below.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
