EasyManuals Logo
Home>MSI>Motherboard>MS-7357

MSI MS-7357 User Manual

MSI MS-7357
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
En-8
MS-7357 Mainboard
Installing Memory Modules
You can find the notch on the memory modules and the volt on the DIMM slots whether
DDR2 or DDR3. Follow the procedures below to install the memory module properly.
1.The memory modules has only one notch on the center and will only fit in the right
orientation.
2.Insert the memory module vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the DIMM slot.
3.The plastic clip at each side of the DIMM slot will automatically close.
Important
You can barely see the golden finger if the memory module is properly inserted in
the DIMM slot.
Volt
Notch

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI MS-7357 and is the answer not in the manual?

MSI MS-7357 Specifications

General IconGeneral
BrandMSI
ModelMS-7357
CategoryMotherboard
LanguageEnglish

Related product manuals