To Next Page

Safe Operation Practices • Contents of Carton • Assembly & Installation • Operation • Warranty

Record Product Information

Before setting up and operating your new equipment, please locate the model plate

and record the information in the area provided to the right. You can locate the

model plate by looking on the outside of the bagger cover. The model plate contains

the unit’s model and serial numbers. This information will be necessary, should you

seek technical support via our web site, Customer Support Department, or with a

local authorized service dealer.

Model NuMber

Serial NuMber

WARNING

Read and follow all safety rules and instructions in this manual before attempting to operate this machine. Failure to comply with these instructions

may result in personal injury.

Safe Operation Practices .......................................................... 2

Contents of Carton ................................................................... 4

Assembly & Installation ........................................................... 6

Operation ............................................................................... 9

Warranty .............................................................................. 10

Español ..................................................................................11

Français .................................................................................21

Table of Contents

NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may differ

from yours.

WARNING

California Proposition 65

Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth

defects.

OperatOr’s Manual

Form No. 769-23750

(November 14, 2019)

Twin Rear Bagger

Model Nos. OEM-190-180A and OEM-190-182A