2
The GEM-RP3DGTL is a “smart”,
interactive, menu-driven keypad designed
for your Napco control panel. A digital
display is provided to show the status of
your system.
This booklet contains important
information about the operation of your
system with this GEM-RP3DGTL Keypad.
Read it carefully and keep it handy for
future reference. Check the Glossary for
an explanation of terms that may be
unfamiliar to you.
You'll probably find subjects mentioned in
this booklet that do not apply to your
system. Napco control panels have such
a wide variety of features that few security
systems, if any, will ever need them all.
Your alarm professional has chosen
appropriate features for your particular
needs.
Regardless of how your system has been
configured, rest assured that it has been
carefully designed and engineered to the
highest industry standards. To assure
optimum safety and security, familiarize
yourself with this equipment. Periodically
check its condition and state of readiness
by testing it at least once a week in both
the ac/battery and battery-only modes
(ask your alarm professional how to make
these tests).
INTRODUCTION
Test your sounding device and backup battery
1.While disarmed, press A.
2.Answer NO (press F) until “3” (Bell Test) appears in the
window.
3. Press YES (E) to execute the test. The alarm will sound
for about two seconds.
• If the alarm does not sound, call for service.
• If the battery is low, a system trouble E02 will appear in
the display. Allow 24 hours for the battery to recharge. If
the trouble continues, call for service.
Test your central station communicator
1. While disarmed, press A.
2. Answer NO (press F) until “15” (Telephone Test)
appears in the window.
3. Press YES (E) to send a test code to the central
station.
4. If the test is not successful, “E03” will display, indicating a
communication failure. Call for service.
IMPORTANT - TEST YOUR SYSTEM WEEKLY
To Next Page
Loading...
Need help?
General
