National Instruments NI USB-6008 User Manual

USER GUIDE AND SPECIFICATIONS
NI USB-6008/6009
Bus-Powered Multifunction DAQ USB Device
This user guide describes how to use the National Instruments USB-6008 and National Instruments
USB-6009 data acquisition (DAQ) devices and lists specifications.
The NI USB-6008/6009 provides connection to eight single-ended analog input (AI) channels, two
analog output (AO) channels, 12 digital input/output (DIO) channels, and a 32-bit counter with a
full-speed USB interface. Table 1 compares the devices.
Table 1. NI USB-6008 and NI USB-6009 Comparison
Feature NI USB-6008 NI USB-6009
AI resolution 12 bits differential,
11 bits single-ended
14 bits differential,
13 bits single-ended
Maximum AI sample rate,
single channel
*
10 kS/s 48 kS/s
Maximum AI sample rate,
multiple channels (aggregate)
*
10 kS/s 48 kS/s
DIO configuration Open collector
†
Each channel individually
programmable as open collector
or active drive
†
* System-dependent.
† This document uses NI-DAQmx naming conventions. Open-drain is called open collector and push-pull is called
active drive.
ni.com/manuals
DeutschFrançais

National Instruments NI USB-6008 Specifications

General

Brand	National Instruments
Model	NI USB-6008
Category	I/O Systems
Language	English