natus ALGO 5 Installation And Assembly Instructions

6 ALGO® 5 Newborn Hearing Screener Service Manual
P/N 000995 Rev.A
FIGURE 6: Cart from the back
• With the shelves facing down, align the base opening with the column. Carefully
route the six cables hanging from the bottom of the cart column one at a time through
the opening in the cart base. The opening allows the column to be fitted in only one
way (see FIGURE 4). Slide the cart base onto the column’s two alignment threaded
studs (FIGURE 7). Note: packaging of cart may include foam and caps for the studs
which will need to be removed prior to assembly.
NOTE: The sixth cable is for the optional page printer. It is included but not shown in
FIGURE 4 or FIGURE 7.
FIGURE 7: Detail Column alignment threaded studs
Alignment
Studs
Plastic Nut

natus ALGO 5 Specifications

General

Brand	natus
Model	ALGO 5
Category	Medical Equipment
Language	English