Neato Robotics D7 User Manual

1. Press and hold the "Right Bumper" and "Start Button" simultaneously for 10 seconds.
2. Allow the robot to turn off, then press the "Start Button" to turn it back on.
3. When back on, the Wi-Fi LED will slowly blink "blue" indicating the robot has entered
pairing mode.
4. Refer back to the Neato app and repeat the pairing process.
5. Select ADD A NEW ROBOT and follow the steps provided.
During the pairing process, the Wi-Fi LED may exhibit the following behavior until the robot is
paired:
LED Color
What it Means
Slow Blinking Blue
Robot is in Pairing Mode
Fast Blinking Blue
Pairing to Neato app/account
Solid Blue
Pairing successful (shows for 5 seconds)
Solid Red
Pairing unsuccessful (shows for 5 seconds)

Neato Robotics D7 Specifications

General

Brand	Neato Robotics
Model	D7
Category	Vacuum Cleaner
Language	English