NEC MultiSync LCD2470WVX User Manual

English
English-5
Power Cord
(LCD2470WNX Only) DC-OUT
NEC optional product attachment.
Do not use this connector unless specified.
Input1 (DVI)
Input2 (D-Sub)
Figure C.4
(Picture: LCD2470WNX model)
Figure C.4a
(Picture: LCD2470WNX model)
A Type
B Type
A Type
A Type
B Type
D-SUB Cable
Power Cord
Flat
USB Cable
(WNX model only)
DVI Cable
Figure C.6
(Picture: LCD2470WNX model)
Figure C.7
(Picture: LCD2470WNX model)
7. Place the connector cover onto the back cabinet (Figure C.5).
8. For successful cable management, place the cables into the cable management in this
order: Power cord and DVI cable (Figure C.6).
9. Place DVI and Power cord into the specific hooks, as indicated in Figure C.6.
10. Place the D-Sub and the USB cable into the specific hooks, as indicated
in Figure C.6 (USB Cable: WNX model only).
11. Pivot the screen 90 degrees back to its original position. Tilt and height of monitor can
be adjusted to fit user’s preference (Figure C.7).
12. Make sure all cables are resting flat against the stand (Figure C.6).
Figure C.5
(Picture: LCD2470WNX model)

NEC MultiSync LCD2470WVX Specifications

General

Brand	NEC
Model	MultiSync LCD2470WVX
Category	Monitor
Language	English