NEC MultiSync V422 Control Guide

(1/71)
EXTERNAL CONTROL NEC LCD Monitor
Rev.2.6
INDEX
I. Application ................................................................................3
II. Preparation ...............................................................................4
2. Connectors and wiring ....................................................................4
2.1 RS-232C Remote control ...............................................................4
2.2 LAN control ...........................................................................4
III. Communication specification ...............................................................5
3. Communication Parameter ................................................................5
3.1 RS-232C Remote control ...............................................................5
3.2 LAN control ...........................................................................5
3.3 Communication timing .................................................................5
4. Communication Format ...................................................................6
4.1 Header block format (fixed length) ......................................................7
4.2 Message block format .................................................................9
4.3 Check code ..........................................................................11
4.4 Delimiter ............................................................................12
5. Message type ...........................................................................13
5.1 Get current Parameter from a monitor. .................................................13
5.2 "Get parameter" reply .................................................................14
5.3 Set parameter ........................................................................15
5.4 "Set parameter" reply .................................................................16
5.5 Commands ...........................................................................17
5.5.1 Save Current Settings .............................................................17
5.5.2 Get Timing Report and Timing reply. ................................................18
5.5.3 NULL Message ....................................................................19
IV. Control Commands .......................................................................20
6. Typical procedure example ...............................................................20
6.1. How to change the “Backlight” setting. ................................................20
6.2. How to read the measurement value of the built-in temperature sensors. ..................23
6.3. Operation Code (OP code) Table .......................................................26
7. Power control procedure .................................................................35
7.1 Power status read ....................................................................35
7.2 Power control ........................................................................37
8. Asset Data read and write ................................................................39
8.1 Asset Data Read Request and reply ....................................................39
8.2 Asset Data write .....................................................................41

NEC MultiSync V422 Specifications

General

Pixel pitch	0.48 x 0.48 mm
Response time	10 ms
Display diagonal	42 \
Display brightness	370 cd/m²
Vertical scan range	50 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1300:1
Display number of colors	16.78 million colors
Supported graphics resolutions	720 x 400, 832 x 624, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
3D	No
Separate H/V sync	Yes
Cable lock slot type	Kensington
USB 2.0 ports quantity	0
S-Video inputs quantity	1
Viewable size, vertical	523.3 mm
Viewable size, horizontal	930.2 mm
DVI-D ports quantity	2
Product color	Black
Product design	Digital signage flat panel
Bezel width (side)	44 mm
Bezel width (bottom)	43 mm
Panel mounting interface	300 x 300 mm
RMS rated power	10 W
Cables included	VGA
Remote control type	IR
Power consumption (standby)	2 W
Power consumption (typical)	155 W
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Package depth	206 mm
Package width	1142 mm
Package height	703 mm
Package weight	27000 g

Weight and Dimensions

Depth	105.6 mm
Width	1022.9 mm
Height	613.5 mm
Weight	22000 g
Depth (with stand)	330 mm
Height (with stand)	651.2 mm
Weight (with stand)	23800 g