SL1100 Multi-Line Terminal
Quick User Guide
For additional information search for “NEC SL1100 Multi-Line Terminal User Guide” in your web browser
Lift the Handset or press Speaker (For the
remainder of this guide we will refer to lifting the
handset but pressing the Speaker key is also valid)
• Dial the required internal number
• For external calls, dial 0 first for an outsi
de
lin
e
Ask the caller to please hold:
• Press Hold
-
hold key flashes.
• You may replace handset if you wish.
To retrieve a call:
• Lift the handset.
• Press the Flashing Line Key
With a call in progress:
• Press Transfer
• Dial an extension, external number o
r
pr
ogrammed one-touch key and announc
e
the call when they answer (optional)
• Replace the handset
Note: If the called extension is busy or does not
answer, press the Green Flashing Key to return
to your caller. If the extension answers and
indicates that they do not wish to take the call,
ask them to hang up and you will be put directly
back to the original caller.
Last dialed number
• Lift the handset and press #5 to initiate the
call
Recently dialed numbers
• Without lifting handset press Redial (Right
Cursor key).
• Press the Cursor button up or down to
search for the required number
•
Lift the handset to initiate the call
With a call in progress (internal or external)
• Press the More soft key and then the Conf
soft key
• Dial an internal or external number
• When the third party answers, press the
Add soft key
Repeat the above 3 steps until all parties
are in the conference. Then press the
Begin soft key to begin the conference
Note: Any party may exit the conference by
hanging up. As long as at least one of the
parties is an extension on the phone system the
conference will remain active.
To Next Page
Need help?
General
