Nedap PowerRouter Application Guideline

1
Before operating the PowerRouter, you may initialize the PowerRouter by using the
PowerRouter software installation tool. The PowerRouter software installation tool helps
you to initialize the PowerRouter but also allows you to make advanced settings and update
the PowerRouter firmware, if applicable.
To help you properly install the PowerRouter via the installation tool, we have compiled this helpful application
guideline. This guideline explains the options and guides you through the procedures for using the installation tool.
Following these steps will ensure proper installation and allow you to quickly and easily connect the PowerRouter
with the correct settings.
Prior to start-up
Before you can use the installation tool you must install the software installation tool on your computer. You may
download the installation tool from the website: www.PowerRouter.com (you will need your login details for this
website). The software installation tool can be used to congure PowerRouters with rmware version 4.0 and
higher. If a PowerRouter with an older rmware version is detected, the installation tool will only allow you to
update the PowerRouter. The installation tool already includes the latest available rmware version so no additional
downloads are required.
System requirements
The installation tool is compatible with the following operating systems:
Operating systems:
> Windows XP (service pack 3)
> Windows Vista
> Windows 7
PowerRouter application guideline
Software installation tool - version 3.0
The PowerRouter must be connected to a USB port on your PC /
laptop via a standard USB cable (printer cable) (g. 1).
Minimum requirements for processor and other hardware:
> Pentium III 800 MHz or equivalent
> 128 MB RAM
> 200 MB free hard disk space
> Resolution of 1024 x 768 pixels with 256 colours

Nedap PowerRouter Specifications

General

Brand	Nedap
Model	PowerRouter
Category	Inverter
Language	English