3
BEFORE YOU BEGIN
Ensure that you have the following information
from your service provider:
- How your Internet service will physically connect to your gateway
- The Settings specic to your type of service.
There are two ways to connect your gateway to the Internet service:
Ethernet WAN
This is the most common access type in Australia and New Zealand
and covers xed line technologies such as nbn™ FTTP, HFC, FTTC
as well as UFB Fixed Wireless and Sky Muster™ satellite services.
This type of Internet service uses the red WAN port on the
back of the gateway to connect to the dedicated connection
box installed by your access network provider.
ADSL or VDSL
These access types are provided by nbn™ FTTB, FTTN
or ADSL/VDSL over a traditional telephone line.
This connection uses the grey DSL port on the back of the gateway.
SOURCE CODE - GNU General Public License
This product includes software code that is subject to the GNU General Public License
(“GPL”) or GNU Lesser General Public License (“LGPL”). This code is subject to the
copyrights of one or more authors and is distributed without any warranty.
A copy of this software can be obtained by contacting NetComm.
To Next Page
Loading...
Need help?
General
