1
Home Wi-Fi Gateway Instructions
1. Connect the gateway. Use the coaxial cable provided by BendBroadband to connect the cable port
(A) to your cable outlet.
2. Connect your computer to the cable modem gateway with an Ethernet cable (B), or via a wireless
device using the default settings located on the back of your wireless gateway.
3. Attach the power adapter cable to the
gateway and plug it into an electrical
outlet. Make sure that the Power button on
the rear panel is in the ON position.
After the gateway and power is connected,
the gateway will automatically attempt to
do the following:
To Next Page
Need help?
General