NETGEAR Universal Pro XS508M User Manual

Installation
Step 1. Connect the equipment.
Connect an Ethernet port or the SFP port on the switch to your router.
Connect the other ports on the switch to network devices.
5-Port or 8-Port 10-Gigabit/Multi-Gigabit
Ethernet Unmanaged Switch With 1 SFP+ Port
Universal Pro Series XS505M and XS508M
Step 2. Connect to power.
Step 3. Check the status.
Package Contents
• Switch (XS505M or XS508M)
• Power cable (localized to the country of sale)
• Rack-mount kit for rack installation
• Rubber feet
• Installation guide
Power LED Ethernet port LEDs for ports 1–4 (XS505M) and 1–7 (XS508M)
On
O
10G link (both port LEDs on). Both port LEDs blinking
indicates trac activity.
Fan LED
5G link (le port LED o, right port LED on). Right port
LED blinking indicates trac activity.
Check fan
Normal
2.5G link (le port LED on, right port LED o). Le port
LED blinking indicates trac activity.
1G or 100M link (both port LEDs on). Both port LEDs
blinking indicates trac activity.
No link (both port LEDs o).
SFP port LEDs (round)
Or, for port 8 (XS508M), Ethernet port LEDs (rectangular)
10G link (both port LEDs on). Both port LEDs blinking
indicates trac activity.
1G link (both port LEDs on). Both port LEDs blinking
indicates trac activity.
No link (both port LEDs o).
Note: On model XS508M, port 8 is a combo port that lets you establish a 1G or 10G
connection on either the Ethernet RJ-45 port (marked 8) or the SFP+ port (marked 8F).
You cannot use both ports (8 and 8F) simultaneously.
XS508M switch
Sample connections
10G link
to 10 G NAS
Network router
Internet
MS510TXPP switch
10G
fiber link
to switch
2.5G PoE link
to WAC740 AP
2.5G link to 2.5 G
gaming computer
10G link to 10G
computer with a
Thunderbolt port
1G link to
computer

NETGEAR Universal Pro XS508M Specifications

General

Brand	NETGEAR
Model	Universal Pro XS508M
Category	Switch
Language	English