Universal WiFi Range Extender
WN2000RPT
Installation Guide
Package Contents
Extender LED Activity
Laptop or Desktop
Computer
Extender Status LED
Front Panel
PC to Extender LED
Front Panel
Link Rate Status (router to Extender connection)*
Connection to router is poor.
Connection to router is good.
Connection to router is optimum.
Extender Status
The Extender is powered on.
PC to Extender Connection Status
The Extender is connected to the PC.
N
ET G E A
R
WiFi Range
Extender
*To determine the Mbps throughput rate of the Extender when used with your router, see the User Manual .
DO DON’T
Router Range
Extender Range
Computer outside
existing router range.
Existing router.
Ideal location of the Extender–
equal distance between the
computer and the router.
Step 2:
Plug in the power adapter and turn on
the Extender, and wait for one minute.
The
Extender Status LED will turn green. If you have trouble
completing this step, please refer to Question 2 in the
FAQ on the back.
Step 3:
Wirelessly connect to the Extender network by
connecting to NETGEAR_EXT.
Make sure the
computer you’re using is outside the range of the router.
When connected, the PC to Extender Connection Status
LED will turn green. If you have trouble completing this
step, please refer to Question 3 in the FAQ on the back.
Step 4:
Open a browser window from the same computer,
and it will automatically take you to the Smart Wizard to
connect the Extender to the existing network.
If you have trouble completing this step, please refer to
Question 10 in the Frequently Asked Questions on the
back.
When the Extender has been integrated into your wireless network, it will extend
the wireless network to include the area outside the range of your existing router.
Setting Up Your Extender
Step 1:
First, place your Extender equal distance between your router and
the wireless computer located outside the range of your existing router.
www.mywifiext.net
www.mywifiext.net
To Next Page
Need help?
General