NETGEAR WNR612 - Wireless-N 150 Router User Manual

Step 1:
Connect your modem.
Step 2:
Connect your router.
Step 3:
Connect your computer.
Step 6:
Configure settings.
Open a browser, such as
Internet Explorer, and enter
www.routerlogin.net
to complete the setup.
Step 5:
Power on your router.
Wait until the power LED
turns solid green.
Step 4:
Power on your modem.
Wait until your modem cycles on
(approximately 2 minutes).
Note: If you have a battery-backed modem,
press the reset button. (In some cases, you may
need to remove, then re-insert, the battery to recycle
your modem.)
CAUTION:
MAKE SURE YOUR MODEM IS
TURNED OFF OR UNPLUGGED
BEFORE STARTING THE
INSTALLATION.
DSL or Cable
Wireless Router
(back)
Modem
Laptop or Desktop
Computer
Wireless Router
(front)
Package Contents:
Basic Wireless Router
WNR612
Installation Guide
Power Adapter
Ethernet Cable
Ethernet cable
(not included)
(not included)
Power/Test LED
Push ‘N’ Connect Security LED
Wireless LED
Internet LED
LAN Ports 1 & 2 LED

NETGEAR WNR612 - Wireless-N 150 Router Specifications

General

Brand	NETGEAR
Model	WNR612 - Wireless-N 150 Router
Category	Wireless Router
Language	English