What to do if code F1 is on the display panel of my NewAir Accessories?
If the display panel shows code F1, it indicates the low voltage car protection mode is active. To resolve this, unplug the adapter from the car and connect the NewAir accessory to another power source. Then, adjust the battery protection mode from H to M or from M to L.
How to troubleshoot a NewAir Accessories electric cooler that is not working?
If your NewAir electric cooler is not working, there are a few things to check: 1. Make sure the plug and socket are properly connected. If not, check the connection of the plug and socket. 2. See if the fuse has blown. If so, replace the burnt fuse. 3. The compressor protection mode may be on. In this case, wait 3 minutes before turning the electric cooler on.
Why are the cooler compartments of my NewAir Accessories too warm?
If the compartments of your NewAir cooler are too warm, consider the following: * Try to minimize opening the door frequently. * If you've recently stored a large amount of warm or hot food, allow the cooler time to reach the desired temperature. * If the cooler has been disconnected for a period of time, allow time for it to reach the desired temperature.
General| Product Type | Beverage Refrigerator |
|---|---|
| Brand | NewAir |
| Model | NPR080GA00 |
| Color | Stainless Steel |
| Capacity | 80 cans |
| Refrigerant | R600a |
| Voltage | 115 V |
| Door Lock | Yes |
| Reversible Door Swing | No |
| Adjustable Legs | Yes |
| Warranty | 1 year limited |
| Power Consumption | 85 watts |
To Next Page
