EasyManuals Logo

Nextar P3 Software Manual

Nextar P3
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background image
Getting started
Congratulations on your purchase of the system. Your system can guide you to
the destination of your choice using signals from Global Positioning Satellites
(GPS) orbiting the earth.
There are 24 GPS satellites orbiting the earth. A GPS device can calculate your
position on the earth if it can receive signals from at least three of these
satellites.
Starting the system
Once you have charged the battery, you are ready to start the system.
To start the system:
1 Press the POWER button. The screen appears.
2 Tap Navigate. A warning screen appears.
3 Tap “I Agree” after you have read and agreed to the warning. The map view
appears and you are ready to set your first destination!
Getting a GPS signal
To use the system to guide you to a destination, the system's GPS antenna must
be receiving signals. GPS signals can be obstructed by ceilings, trees, and
nearby tall buildings. Signals can also be obstructed by the roof of your vehicle.
For best results, position your system where it has a clear view of the sky.

Other manuals for Nextar P3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nextar P3 and is the answer not in the manual?

Nextar P3 Specifications

General IconGeneral
BrandNextar
ModelP3
CategoryGPS
LanguageEnglish

Related product manuals