80
Nice Gate&Door
Run 1500
RUN1500/1500P
230
2
400
0.25
1000
60
44
-20 ÷ +50
400x255x390 h
19
Compartment
for control unit
protected by
removable box
Pressure die-cast
aluminium base and release,
with epoxy painting
Code Description Pack/pallet
RUN1500 Irreversible, 24 Vdc, with built-in control unit,
with electromechanical limit switch,
for sliding gates weighing up to 1500 kg
12
RUN1500P Irreversible, 24 Vdc, with built-in control unit,
with inductive limit switch,
for sliding gates weighing up to 1500 kg
12
For sliding gates weighing
up to 1500 kg.
Versions with electromechanical
limit switch (RUN1500) and with
inductive limit switch (RUN1500P).
User-friendly: the BlueBUS technology,
enables to power and control a maximum
of 7 couples of photocells from the MoonBus
series using two wires only.
Practical: the control unit and PS124
buffer battery (optional) can be connected
by means of a simple connector
and can be housed directly inside the motor.
Advanced: the temperature sensor adapts
the motor force to weather conditions,
setting the thermal cut-out protection
accordingly; a master/slave selection
automatically synchronises 2 motors,
enabling the automation of sliding gates
with two opposing leaves.
Intelligent: thanks to the obstacle detection
system and automatic programming
of the working times.
Self-diagnosis by means of a fl ashing light.
8 programming levels.
Safe: acceleration and deceleration
can be adjusted at the beginning and end
of each opening and closing manoeuvre.
Sturdy: aluminium release handle
for easy opening.
Very quiet: gear motor on bearings.
Technical specifi cations
Code
Electrical data
Power supply (Vac 50/60 Hz)
Absorption (A)
Power (W)
Performance data
Speed (m/s)
Force (N)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. ( °C Min/Max)
Dimensions (mm)
Weight (kg)
To Next Page
Need help?
General
