Chapter 6 Specifications
32
Safety standards
Applicable standards
• CE Marking
• Low Voltage Directive
• EMC Directive
• C-UL-US Listed
• FCC Part 15 Subpart B Class A
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
• CAN ICES-003(A) / NMB-003(A)
• Australian EMI (AS/NZS CISPR11)
6.4 AC Adapter
Model 3-AC (Model name by the manufacturer: FSP040-RHAN2)
4-AC (Model name by the manufacturer: FSP040-RHAN3)
Manufacturer FSP Group Inc.
Input rating 100-240 VAC ±10%, 50-60 Hz, 1.5 A
Output rating 12 VDC, 3.33 A max.
Power cord • When used in 100-120 V region, outside Japan
UL listed detachable power cord set, 3 conductor grounding
(3 conductor grounding Type SVT, No.18 AWG, 3 m long maximum, rated
at 125 VAC minimum)
• When used in 220-240 V region
Detachable power cord set approved according to EU/EN standard, 3 conductor
grounding
(3 conductor grounding Type H05VV-F 1 mm
2
, 3 m long maximum, rated
at 250 VAC minimum)
• When used inside Japan
PSE approved detachable power cord set, 3 conductor grounding
(3 conductor grounding Type VCTF 3x0.75 mm
2
, 3 m long maximum, rated
at 125 VAC minimum)
* For details, see the instruction manual supplied with the AC adapter.
To Previous Page
Loading...
Need help?
General