- A 0 ・ -
logo_Q0650_forGraphic
071004_Gdesign_ito
VBA21001-R.3753.A
Direction for
positioning
Dust trap agent is applied here.
(
Do not wipe out. Do not apply
when repairing, either.)
・
Mount SI (#13).
・
Mount the nder eld frame 1 (#282-1) by positioning towards the direction of the arrow.
・
Attach the in-nder display prism (#9).
・
Mount the SI-retaining unit (#B277) and x it with two screws (#635).
・
Mount the nder eld frame 2 (#283).
・
Mount the hollow penta (#B4).
・
Attach the penta-retaining springs (#201 and #202-1) and x them each with the two screws (#635).
・
Mount [#284], then [#3] and [#297A or #297B].
Penta unit
Screen areas
#759
#B4
#635×2
#202-1
#201
#635×2
#B277
#282-1
#793×2
#283
#9
#13
#297Aor#297B
#3
#284
#11
Adhesive: Super X