Ninja CT800 Series User Manual

5
1-877-646-5288
23 During operation and handling of the
appliance, avoid contact with moving
parts.
24 DO NOT operate the appliance with an
empty pitcher or cup.
25 While blending liquids or ingredients that
are frozen, cold, or room temperature, DO
NOT fill pitcher past the MAX LIQUID line.
26 DO NOT microwave any pitcher or
accessories provided with the appliance.
27 Before operation, ensure all utensils are
removed from pitcher and cup. Failure
to remove utensils can cause vessel to
shatter and potentially result in personal
injury and property damage.
28 ALWAYS operate blender with lid and lid
cap firmly in place. The lid cap should be
removed only when adding ingredients and
when using the tamper. NEVER remove
the lid cap while blending hot liquids.
29 Keep hands and utensils out of pitcher
and cup while blending to reduce the risk
of severe injury or damage to the blender.
While the blender is running, the ONLY
utensil that may be used is the included
tamper. When the blender is NOT running,
then a scraper may be used.
30 DO NOT blend hot ingredients or liquids
in the blender cup. Doing so may cause
excessive pressure buildup, resulting in
the risk of the user being burned. Only
the pitcher can be used to blend hot
ingredients.
31 To avoid risk of scalding from spray or
escaping steam, DO NOT blend hot
or warm liquids or ingredients beyond
the MAX HOT LIQUID fill line. Liquids or
ingredients above the MAX HOT LIQUID
fill line need to be at room temperature or
colder for processing.
32 DO NOT blend hot ingredients or liquids
on the pulse setting to avoid risk of
scalding from spay or escaping steam.
33 To avoid the risk of scalding, NEVER
operate the appliance without pitcher
lid and lid cap in place while blending
hot liquids. DO NOT use the tamper
while blending hot liquids. Keep hands
and exposed skin away from lid cap
while blending hot ingredients to prevent
possible burns from escaping steam.
Failure to keep the lid cap in place while
blending hot liquids may result in risk of
scalding.
34 Handle the pitcher with care when blending
hot ingredients, as the lid, lid cap, and
sides of pitcher may become hot to touch.
When moving the pitcher, use the handle
to carry. If needed, hold bottom of pitcher
to stabilize.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock, or property damage, basic
safety precautions must ALWAYS be followed, including the following
numbered warnings and subsequent instructions.

Ninja CT800 Series Specifications

General

Model	CT800 Series
Power	1200 watts
Blade Material	Stainless Steel
Pulse Technology	Yes
Dishwasher Safe Parts	Yes
Features	Auto-iQ
Functions	Chop, Mix, Puree, Dough
Warranty	1 year
Settings	Low, High, Pulse, Dough

Summary

Important Safety Instructions

General Safety Precautions

Essential safety rules for appliance operation, handling, setup, and electrical safety.

Getting to Know Your Ninja Chef Blender

Main Unit Components

Identifies main blender parts: motor base, pitcher, and accessories.

Available Accessories

Lists optional or included accessories for various blender functions.

Features and Modes

Control Panel Modes

Explains blending modes: Clean, iQ, Manual, Timer+, and Pulse.

Auto-iQ Programs

Details ten pre-set Auto-iQ programs for automated blending recipes.

Before First Use

Preparation Steps

Instructions for initial setup, including washing parts and appliance preparation.

Using Your 72 oz. Pitcher

Pitcher Setup and Installation

Guides for plugging in, attaching the pitcher, and ensuring proper motor base placement.

Using Your Single-Serve Cups

Cup Setup and Installation

Instructions for preparing and attaching single-serve cup to motor base.

Care and Maintenance

Cleaning Procedures

Details hand-washing, dishwasher use, and self-cleaning mode for blender parts.

Motor Base and Storage

Instructions for cleaning motor base and proper storage of the blender unit.

Resetting Motor Thermostat

Procedure to reset motor thermostat if unit overheats or overloads.

Ordering Replacement Parts

Information on ordering additional parts and attachments for the blender.

Troubleshooting Guide

Common Issues and Solutions

Addresses common issues: motor start, food consistency, suction, and error messages.

One (1) Year Limited Warranty

Warranty Coverage Details

Explains what is covered and not covered by the manufacturer's warranty.

How to Get Service

Provides instructions to initiate warranty claims and contact customer service.