AUTO-iQ® PROGRAMS
1 To begin, press the Power button.
2 Select one of the four pre-set
options that best suits your recipe.
NOTE: The pre-set feature will
automatically stop the unit at the
end of the program. To pause the
unit at any time, press the currently
active button a second time, or
press the Power button to cancel.
MANUAL MODES
1 To begin, press the Power button.
2 Choose the speed that best suits
your recipe.
NOTE: The PULSE setting will run
only when touched.
3 When you are done blending, press
the LOW or HIGH button again to
stop blending.
NOTE: The LOW and HIGH settings
will run continuously until they are
manually stopped.
TO SERVE YOUR RECIPE
1 Wait for the Stacked Blade Assembly
to come to a complete stop.
2 To remove the pitcher, turn the
handle to the right and lift it up.
NOTE: For thinner mixtures, ensure
the lid is locked into place, open the
pour spout cap on the lid, and empty
the contents of the pitcher through
the pour spout.
NOTE:
For thicker mixtures that
cannot be emptied through the pour
spout, remove the lid and Stacked
Blade Assembly before pouring. To
remove the lid, press the RELEASE
button on the lid and lift the handle.
The lid can then be removed from
the pitcher. To remove the Stacked
Blade Assembly, carefully grasp it
by the top of the shaft and remove
from the pitcher. The pitcher can
then be emptied.
MOVING YOUR BASE
1 When you are done blending,
unplug your unit.
2 To remove the base from the
counter, place your hands under
both sides of the base and lift it
up toward you.
ASSEMBLING & USING YOUR
TOTAL CRUSHING® PITCHER–CONT�
To Next Page
Loading...
Need help?
General