Note: The phone should be in local mode when performing Self tests
Steps
1. Check the tests shown in the figure below: Testing→ Self Tests , and press the Start button.
2. A test is either Passed or Fatal. If Fatal continue the selftest troubleshooting. If Passed continue with the
other RF troubleshootings.
3. If Fatal, press Details to see error codes
Error codes will now show up in the right most column marked
Detailed
.
RM-561
RF troubleshooting
Issue 1 COMPANY CONFIDENTIAL Page 4 –9
Copyright © 2009 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
