[ 80 ]
14
2 When Text messages appears, press Select.
3 Scroll to Write message and press Select.
4 Enter a character using the keypad.
5 Press Options, scroll to Dictionary and press OK.
6 Scroll to the dictionary you want (for example, English).
7 Press OK.
T9 dictionary activated appears. (“T9” is the technical name for
predictive text input.) This means you can use predictive text method
to enter messages. In the text message window where you write, the
predictive text icon <T9 icon> appears.
Turn off predictive text input
1 Repeat steps 1 through 7 in “Turn on predictive text input.”
2 Scroll to Dictionary off and press OK.
Tips for predictive text
1 To insert a symbol, press and hold <*+>.
The symbol screen appears, showing the following characters:
. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ % / < > =
2 Scroll to the symbol you want and press Insert.
When you’ve finished writing, make sure the underlined word is the
word you intended to write.
If the word is correct:
• Insert a punctuation mark, if needed.
• Press <#^> to confirm the change and enter a space.
• Start writing the next word.
If the word is not correct:
• Press <*+> repeatedly until the word you want appears, then
press <0_> to confirm it.
To Next Page
Loading...
Need help?
General
