©2001 Nokia Mobile Phones. All rights reserved.
WAP services (Services - Menu 13)
101
WAP services (Services - Menu 13)
• IP address (shown if the bearer is data): Key in the address (press for a period) and press
(OK).
• Authentication type (shown if the bearer is Data): Scroll to Secure or Normal, and press
(Select).
• Data call type (shown if the bearer is Data): Scroll to Analogue or ISDN, and press (Select).
• User name (shown if the bearer is Data): Key in the user name (press for a period) and press
(OK).
• Password (shown if the bearer is Data): Key in the password and press (OK).
6. After you have made all the required settings, you can change the name of the setting set. Press
and then (Options), scroll to Rename, and press (Select). Key in the name and press
(OK).
The settings are now saved and you can make a connection to the WAP service. See Making a
connection to a WAP service.
■ Making a connection to a WAP service
First, activate the settings of the WAP service that you want to use.
If you want to use the same WAP service (that you accessed using the Home option in the Services
menu) as the last time, you do not need to activate its settings again.
To activate the settings:
1. In the Services menu, scroll to Settings and press (Select).
2. Scroll to Connection settings and press (Select).
3. Scroll to the appropriate setting set and press (Options).
To Next Page
Loading...
Need help?
General
