Pair devices
Select
> Settings
> Connectivity
>
Bluetooth
.
Open the paired devices tab.
Before pairing, decide on your own passcode (1-16
digits), and agree with the user of the other device to
use the same code. Devices that do not have a user
interface have a fixed passcode. You need the passcode
only when you connect the devices for the first time.
After pairing, it is possible to authorise the connection.
Pairing and authorising
the connection makes
connecting quicker and easier, as you do not have to
accept the connection between paired devices every
time you establish a connection.
The passcode for remote
SIM access must have 16
digits.
1. Select Options
> New paired device
. The device
starts to search for Bluetooth devices within range.
If you have sent data using Bluetooth connectivity
before, a list of the previous search results is
displayed. To search for more Bluetooth devices,
select
More devices
.
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
3. Select Yes
to make the connection between your
device and the other de
vice automatic, or
No
to
confirm the connection manually every time a
connection attempt is made. After pairing, the
device is saved to the paired devices page.
To give a nickname to the paired device, select
Options
> Assign short name
. The nickname is only
displayed in your device.
To delete a pairing, select
the device whose pairing you
want to delete and
Options
> Delete
. To delete all
pairings, select Options
>
Delete all. If you are
currently connected to a device and cancel the pairing
with that device, pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect automatically to
your device, select
Set as authorised
. Connections
between your device and the other device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use
this status for your own
devices, such as your compatible headset or compute
r,
or devices that belong to someone you trust. If you
want to accept connection requests from the other
device separately every time, select
Set as
unauthorised
.
To use a Bluetooth audio acce
ssory such as a Bluetooth
handsfree or headset, you need to pair your device with
the accessory. For the passcode and further
instructions, see the accessor
y user guide. To connect
to the audio accessory, switch on the accessory. Some
audio accessories connect automatically to your
device. Otherwise, open the paired devices tab, selec
t
the accessory and
Options
> Connect to audio
device.
65
Connectivity
Cyan
To Next Page
Loading...
Need help?
General
