Block devices
Select
> Settings
> Connectivity
>
Bluetooth
.
To block a device from
establishing a Bluetooth
connection to your device,
open the paired devices tab.
Select a device you want to block and
Options >
Block.
To unblock a device, open the blocked devices tab, and
select Options
> Delete
. To unblock all blocked
devices, select
Options
> Delete all
.
If you reject a pairing requ
est from another device, you
are asked if you want to
block all future connection
requests from this device. If you accept the query, the
remote device is added to the list of blocked devices.
Data cable
To avoid damaging the memory card or corrupting
data, do not disconnect th
e USB data cable during a
data transfer.
Transfer data between your device and a PC
1. Insert a memory card in your device, and connect
the device to a compatible PC using the USB data
cable.
2. When the device asks which mode to use, select
Mass storage
. In this mode, you can see your
device as a removable
hard drive in the PC.
3. Transfer the desired data between the PC and your
device.
4. End the connection from the PC (for example, from
an Unplug or Eject Hardwa
re wizard in Windows) to
avoid damaging the memory card.
To modify the USB mode settings, select
>
Settings >
Connectivity
> USB.
To change the USB mode you normally use with the
data cable, select
USB connection mode
.
To set the device to ask which mode to use each time
you connect the USB data ca
ble to the device, select
Ask on connection
> Yes.
To use Nokia PC Suite with your device, install Noki
a PC
Suite on your PC, connect the USB data cable, and se
lect
PC Suite.
Sync
Select
> Settings
> Connectivity
>
Sync.
Sync enables you to synchronise your notes, calendar
entries, text and multimedia messages, browser
bookmarks, or contacts with various compatible
applications on a compatible computer or on the
internet.
You may receive synchronisat
ion settings in a special
message from your service provider.
A synchronisation profil
e contains the necessary
settings for synchronisation.
When you open the Sync
application, the default or
previously used sync profile is displayed. To modify the
profile, scroll to a sync item, and select
Mark to include
it in the profile or
Unmark
to leave it out.
66
Connectivity
Cyan
To Next Page
Loading...
Need help?
General
