8260 User Guide version v. 0.06 [ 29 ] 4/21/00
Use the phone book
OR
1 At the Start screen, press
Names.
2 Begin entering the first few digits of the number that you want to
call.
3 When the appropriate name/number appears on the screen,
press to dial this number.
OR
1 At the Start screen, press
Names.
2 At Search, press
Select.
3 Enter the name of the person that you want to call and press
OK.
4 When the appropriate name/number appears on the screen, press
to dial this number.
• Erase stored names and numbers
Note: You cannot undo Erase functions, so be careful!
1 Using one of the methods described in “Recall and redial numbers”
on page 28, recall the stored name and its associated number.
If you chose Name only as your scrolling view, continue to step 2. If
you chose Name+number as your scrolling view, proceed to step 3.
2 Press
Details.
3 Press
Options.
4 Scroll to Erase, then press
Select.
The Erase? message appears.
5 Press
OK to erase this name and associated number.
To Next Page
Loading...
Need help?
General
