©2002 Nokia Corporation. All rights reserved.
Menu functions
60
• To activate the IR port of your phone to receive data via IR, press Menu and select Infrared.
• The user of the sending phone selects the desired IR function to start data transfer.
If data transfer is not started within two minutes after the activation of the IR port, the connection is
cancelled and has to be started again.
IR connection indicator
• When is shown continuously, the IR connection is activated and your phone is ready to send or
receive data via its IR port.
• When blinks, your phone is trying to connect to the other device or a connection has been lost.
■ Bluetooth (Menu 10)
Bluetooth technology allows wireless connections between electronic devices. Since
Bluetooth devices communicate using radio waves, your phone and the other
Bluetooth device do not need to be in line of sight. The two devices only need to be within a maximum
of 10 meters of each other, although the connection can be subject to interference from obstructions
such as walls or other electronic devices.
In some countries, there may be restrictions on using Bluetooth devices. Check with your local
authorities.
Note: The phone must be switched on to use this function. Do not switch on the phone when the use of a
wireless phone is prohibited or when it may cause interference or danger.
A Bluetooth connection can be used to send faxes or to connect wirelessly to compatible Bluetooth
accessories or to compatible computers. In the Bluetooth menu, you can manage connections and
define settings.
To Next Page
Loading...
Need help?
General
