What causes 'Bad firmware version error' on Nokia A032 Wireless Access Point?
A 'Bad firmware version error' on your Nokia A032 Wireless Access Point indicates that the PCMCIA radio card has an incompatible firmware version. The manufacturer of the radio card typically provides utilities to upgrade the firmware.
What to do if Nokia A032 shows 'No PCMCIA error'?
The 'No PCMCIA error' on your Nokia A032 Wireless Access Point indicates that no PCMCIA card was detected. This can happen if the PCMCIA slot is empty or if the radio card is not properly seated. Ensure the card is correctly inserted.
What does 'Bad CMOS memory error' mean on Nokia A032?
If your Nokia A032 Wireless Access Point displays a 'Bad CMOS memory error', this indicates a checksum error in the configuration memory. The device will automatically reload the default configuration parameters to resolve this issue.
Why does my Nokia A032 Wireless Access Point show a 'Bad PCMCIA card error'?
A 'Bad PCMCIA card error' on the Nokia A032 Wireless Access Point means that the PCMCIA card is not compatible with the device. This could be because it is not a radio card or because it is an incompatible radio card.
What does 'Bad log sector error' on Nokia A032 Wireless Access Point mean?
If the Nokia A032 Wireless Access Point shows a 'Bad log sector error', it means the log information in the flash memory has been corrupted. The device will automatically restore an empty log file.
General| Brand | Nokia |
|---|---|
| Model | A032 |
| Category | Wireless Access Point |
| Language | English |
To Next Page
