ENGLISH
If charging does not start,
disconnect the charger, plug it in
again, and retry. Charging the
battery fully may take up to
2hours.
3. When the battery is fully charged,
the indicator light turns off.
Disconnect the charger from the
headset and the wall outlet.
The fully charged battery has power
for up to 6 hours of talk-time or up to
150 hours of standby time. However,
the times may vary with different
compatible Bluetooth devices, usage
settings, usage styles, and
environments.
When battery power is low, the
indicator light quickly flashes twice
about every 3 seconds.
Switch the headset on or off
To switch on, press and hold the
multifunction key until the headset
beeps four times and the indicator
light is displayed.
To switch off, press and hold the
multifunction key for about 4 seconds.
The headset beeps four times, and the
indicator light is displayed briefly.
Pair the headset
1. Ensure that your phone is switched
on and the headset is switched off.
2. Press and hold the multifunction
key until the indicator starts to
flash quickly.
3. Activate the Bluetooth feature on
the phone, and set the phone to
search for Bluetooth devices.
4. Select the headset from the list of
found devices.
5. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones you may
need to make the connection
separately after pairing. You only
To Next Page
Loading...
Need help?
General
