1. Insert the SIM and memory
card
1. Put your fingernail in the back cover opening
slot, bend the back cover open, and remove it.
2. Slide the nano-SIM in slot 1 with the contact area
face down. If you have a second SIM, slide it in slot 2.
Tip: To find out if your phone can use 2 SIM cards,
see the label on the sales box. If there are 2 IMEI
codes on the label, you have a dual-SIM phone.
3. If you have a memory card, slide it in the memory
card slot.
4. Put back the back cover.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may
damage the card and the device and corrupt data
stored on the card.
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
Note: Switch the device off and disconnect the
charger and any other device before removing any
covers. Avoid touching electronic components while
changing any covers. Always store and use the
device with any covers attached.
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
Note: On dual SIM capable devices, both SIM1
and SIM2 slots support 4G networks. However, if
your SIM1 and SIM2 are both LTE SIM cards, the
primary SIM supports 4G/3G/2G networks, while
the secondary SIM can only support 3G/2G. For
more information on your SIM cards, contact your
service provider.
To remove the battery, lift it out.
2. Charge the battery and switch
th
e phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB micro-B cable. You can also
charge your phone from a computer with a USB
cable, but it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
For an online user guide and troubleshooting help,
go to www.nokia.com/mobile-support.
286647793 V1.0
Get Started
Nokia xx
TA-1339 EN-LATAM
Camera
Flash
Microphone
USB connector
Front camera
Earpiece
Headset connector
Flash
Volume keys
Power/Lock key
Loudspeaker
To Next Page
Need help?
General
Weight and Dimensions
