Copyright © 2007 Nokia. All rights reserved.
Settings
112
Call barring
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the restriction password from your
service provider.
To set an option on or off, select Activate or Cancel. To
check whether the option is active, select Check status.
Call barring affects all calls, including data calls.
Call barring and call diverting cannot be active at the
same time.
When calls are barred, calls may be possible to the official
emergency number.
Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with .
Network mode (shown only if supported by the operator) —
Select which network to use. If you select Dual mode, the
device uses the GSM or UMTS network automatically,
according to the network parameters and the roaming
agreements between the wireless service providers.
Contact your network operator for more details.
Operator selection — Select Automatic to set the device
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
network used by the service provider whose SIM card is in
your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display — Select On to set the device to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
