NORSTAR PHONE SYSTEM
M7324, M7310, M7208
T7316, T7208, T7100 SETS
Commonly Used Features
To Call An Extension: To Retrieve A Parked Call:
1. Lift handset or press an INTERCOM key 1. Lift handset or press INTERCOM key
2. Dial extension 2. Dial park code where call is parked
To Use Voice Call: To Page:
1. Lift handset or press an INTERCOM key 1. Lift handset
2. Press
Voice Call
key or F66 2. Press the
Page
key or F611
3. Dial extension 3. Make your announcement
If the person is on the phone, VC will not work
4. Press RLS key
To Call An Outside Line: To Turn On/Off DND:
1. Lift handset or press INTERCOM key 1. Press the DND or F85 to turn on
2. Dial 9 followed by the telephone number 2. Press the DND or F#85 to turn off.
To Place A Call On Hold: To Conference:
1. Press the HOLD key Have the 1
s
caller on the line
1. Press
HOLD
for first call
To Retrieve Caller On Hold: 2. Get the 2
nd
party on the line
1. Lift handset 3. Press
CONF
or F 3 button
2. Press the INTERCOM key that has the flashing 4. Select the 1
st
caller (the held line)
arrow
Remember when you hang up, the conference call is
terminated
To Transfer A Call:
While caller in on the line To Pickup A Specific Ringing Phone:
1. Press
TRANSFER
softkey or F70 1. Dial Feature 76
2. Dial the extension of the person you are 2. Dial extension you want to pick up
transferring to.
3. You may announce the call at this time by waiting To Use System Speed Dial:
for the called party to answer 1. Press Speed Dial button or F 0
•
Press JOIN softkey to complete the transfer
2. Enter the speed dial address
•
Press RETRY softkey to enter a different
Extensions
•
Press CANCEL softkey to return to the caller
To Park A Call:
While caller is on the line:
1. Press
Park
key or F 74
2. Look at display to see where call is parked
3. Press release or hang up receiver
To Next Page
Need help?
General
