Model 5330
Programmable Synchro/Resolver Simulator
North Atlantic Industries, Inc.
.
631.567.1100/631.567.1823 (fax)
04-26-02 5330A001 Rev B1.0
170 Wilbur Place, Bohemia, NY 11716 www.naii.com
/ e-mail:sales@naii.com Cage Code: OVGU1 Page 1 of 8
• 0.001° Resolution
• 0.003° Accuracy at No Load
• Frequency 47 Hz to 10 kHz
• Programmable Output Voltages
• Velocity to 12,600°/sec at 0.01° Resolution
• Direct Replacement for DDC SM-31210B Series
GENERAL
The Model 5330 is a versatile programmable simulator that will generate three-wire Synchro or four-wire Resolver signals
at various voltage levels and different frequency inputs. Static angles and bi-directional rotational velocities are fully
programmable. This instrument is an ideal replacement for older units that do not offer rotational capability.
The dynamic mode simulates a rotating component in either clockwise or counterclockwise direction. Any rotational speed
between ± 0.5 rps and ±35 rps/sec may be programmed. These dynamic signals may be used to test servo systems
under slewing conditions or to verify that electromechanical systems repeat their angular positions.
When combined with our programmable angle position indicator Model 8810, a high-accuracy manual/automatic test set
configuration is formed that can be used to check rotating components, Synchro/Resolver-to-digital converters and similar
items or systems requiring such stimulus.
To Next Page
Need help?
General