3 of 8
DO NOT lift weights or exercise while occupying the product.
This transport chair has not been approved as a seat surface to be used within a vehicle. Transport chair
must be on a level surface when transferring user to or from seat. Footrests should be no less than 2 1/2
inches from the oor/surface.
COMMON PART LOCATIONS
HAND GRIPS
FOOTREST
FOOTPLATE
BACK UPHOLSTERY
SEAT UPHOLSTERY
HANDLE
HAND BRAKE
FOLDING MECHANISM ARM PAD
ARMREST
BRAKE
12” WHEEL
8” WHEEL
FORK
To Unfold
1. Remove chair from the box and place it on the ground. Remove any cardboard protection and the
plastic from the wheels. (We recommend turning the box on the side and “rolling” out the Transport
Chair).
2. Bring the folding push handles upward fully to enlarge and lock the push pins into the frame of the chair.
3. Place both hands on the upholstery just to the inside of the seat tubes and push down and out until
the seat is fully opened. Your ngers could be pinched, therefore, be sure both hands and all ngers
are at on the upholstery. Do not allow ngers to grab or reach the black tubes that secure the seat.
Continue to push down and outward until tubes engage into the seat supports. Please call NOVA
customer service if you have any questions.)
To Fold
1. Pull upward on the middle of the seat from the front and rear until the chair is completely folded.
2. Release and fold down the back/push handles by pushing down on the release paddle and allowing
the handles to come down into a folded position.
To Attach the Footrests
1. First determine the left and right side by folding down the footplate and placing them in front of the
seat. The foot plates should be facing each other and directly in front of the seat.
2. Place the attachment plates with holes above the pins and slowly lower the holes onto both pins.
3. Swivel the footrests inward until the silver release lever engages and locks the footrest into the
forward position.
MODEL: 352
To Next Page
Loading...
Need help?
General
