Usage Instructions
To Open
1. Pull armrests apart to unfold chair.
2. Swing folded-down back up and lock upright into place on back
supports.
3. Attach footrests on each side by inserting the holes onto the
vertical pegs of the frame. Swing footrests inward to lock in place.
To Fold
1. Push button release on both back uprights to fold back down
behind chair.
2. Pull folding straps on outer seat edges towards each other to fold
chair.
3. To remove footrests, pull silver release lever to unlock. Lift the
footrests off the hooks.
To Transfer Patient
1. Push forward on brake handle to lock rear wheels and secure chair
from rolling.
2. Swing footplates up to outer sides or turn both footplates upward
to a vertical position.
To Adjust Length of Footrests
1. Locate tool wrench included with the footrests.
2. Turn wheels so they are in the “wheeled” position (as pictured).
3. Use the tool wrench to slightly loosen the silver hex screw located
on the bottom of the footrests by turning the screw left.
4. Pull on the footplate to desired length. Footrests should be a
minimum of 2
1
/
2
" from the ground to ensure proper clearance.
5. Re-tighten the hex screw.
6. Repeat on other side.
To Next Page
Loading...
Need help?
General
