3
User Guide (English)
Introduction
Box Contents
Dashboard Power Adapter
Stand User Guide
USB Cable Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit numark.com.
For additional product support, visit numark.com/support.
Quick Start / Connection Diagram
1. If you want change the height and viewing angle of the display, remove the screws from
both ends of the stand and reinsert them into one of the three pre-drilled height
adjustment points. Be sure to fully tighten screws when finished.
2. Connect your compatible controller to one of the USB In Ports.
Note: For a list of compatible controllers, please visit numark.com.
3. Using the included USB cable, connect the “To PC” USB Port on Dashboard to a USB
port on your computer.
4. Connect the included power adapter to the Power Input and plug it into a power outlet.
5. Power on your controller and Dashboard.
6. Open your Serato DJ software.
Items not listed under Introduction > Box Contents are sold separately.
Computer
USB Flash Drive
Power
External DJ Controller
Dashboard
To Next Page
Loading...
Need help?
General
