5
4. Connect and Start DJing!
Follow this sequence of steps whenever you use NS7III:
1. Make sure all devices are off and all faders and gain knobs are set to “zero.”
2. Connect input sources (microphones, turntables, CD players, etc.) to NS7III.
3. Connect output devices (headphones, power amplifiers, sub-mixer, recorders, etc.) to NS7III.
4. Plug all devices into power sources, and turn on devices in proper order:
• When starting a session, turn on (1) input sources, (2) NS7III and display unit, (3) output
devices.
• When ending a session, turn off (1) output devices, (2) NS7III and display unit, (3) input
sources.
5. Using a standard USB cable (included), connect the “To PC” USB port on NS7III’s display
unit to your computer.
6. Open Serato DJ and go! For more information on how to use Serato DJ with NS7III, visit
serato.com/dj/support and select Numark NS7III.
Connection Diagram (example):
00.0%
Any items shown here but not mentioned in Introduction > Box Contents are sold separately.
Computer
Headphones
(on front panel)
Turntable
Smartphone,
tablet, etc.
Power
Loudspeakers
Microphone
(on front panel)
USB thumb drive
To Next Page
Loading...
Need help?
General
