Chapter 2 – Hardware Installation
2
Do not remove a card from the anti-static container until you are ready to install it.
When you remove a card from your computer, place it back in its container.
Do not let your clothes touch any electronic parts.
When handling a card, hold it by its edges, and avoid touching its circuitry.
Before You Begin
Before your process next step, make sure your computer system meets the
peripheral requirements and switch to Standard VGA Display Driver.
Prepare Your Computer for Installation
Prior to working on your computer, make sure the power and any related equipment
are turned off.
How to Insert Your AGP Graphics Card
How to Connect the Monitor
Plug your monitor cable into the monitor connector on
your AGP graphics card. Make sure the other end of
the monitor cable is properly connected to your
monitor.
To Next Page
Loading...
Need help?
General
