GeForce GT series
Copyright © 2013 Jaton Corporation, USA 14
Upgrade Steps:
Add or change your video adapter to an existing system, you may
precede a few steps before you install the new hardware and software
(video display driver). The followings are some of the considerations:
1. To add a new adapter, ensure the mainboard has available IRQ
for new devices, and there is no conflict between each other.
2. If you try adding this video adapter to an ALL-IN-ONE mainboard
(with a built-in video port), then you have to disable that port first)
in the Windows Device Manager. Otherwise, there will be a
problem for the new video adapter setup.
3. The driver installation for system upgrade is the same as below, if
error occurs when you proceed to step 1, 2 or 3, please consult
with your system dealer or the existing hardware manufacturer
support.
To Next Page
Loading...
Need help?
General
