15
4. CONTROLS – the front panel
BIAS adjustment
BIAS regulators and corresponding LED array for each power tube.
Remote control receiver
To ensure optimum operation of the IR remote control, do not
cover this window.
Status indicators
Power Indicates that the unit is switched on.
Protection Red LED lights up when the electronic protection
system has switched off the amplifier in response
to an amplifier fault (see chapter 6.1.).
Soft-start Lights up during the soft-start process immediately
after switch-on. This LED extinguishes after about
1 minute when soft-start has been completed (see
chapter 6.2.).
Front Ch. Illuminates when multichannel-bypass function is
selected (see chapter 6.4.).
Volume control
Remote controlled motorized potentiometer.
To Next Page
Loading...
Need help?
General
