14: English
Name of Toxicoligically Synergistic Products:
Not
available.
Reactivity Data ____________________
Stability:
Stable in general.
Materials
to Avoid:
None.
Polymerization:
Will not occur.
Hazardous Decomposition or Byproducts:
Combustion
products include carbon monoxide and carbon dioxide.
Incompatibility:
Avoid exposure to strong oxidizers.
Preventive Measures ________________
Personal Protective Equipment
Respiratory Protection:
Not normally required. For large
spills, use dust respirator mask during cleanup.
Protective Gloves and/or Eye Protection:
Not normally
required. For large spills, use leather gloves and safety
goggles during cleanup.
Engineering Controls
Ventilation:
Outside of normal ventilation, not normally
required.
Other Protective Equipment and/or Hygienic
Practices:
None.
Spill Cleanup
Small Spills
1. Remove sources of ignition.
2. Carefully clean up the spill with a wet cloth, avoiding
inhalation of fine dust.
Large Spills
1. Remove sources of ignition and keep unnecessary and
unprotected personnel away from area.
2. Wear protective gear: dust respirator mask, leather
gloves, safety goggles.
3. Vacuum or sweep the material into a bag or other sealed
container, then wipe up remainder with a wet cloth.
Waste Disposal
• Prevent release of material into natural waters and sewers.
• Follow appropriate federal, state and local regulations.
• Small amounts can be incinerated.
Careful! Combustion can create harmful gases such as
carbon monoxide.
• Large amounts must be passed to a licensed waste
contractor.
Precautions
Precautions for Handling:
Keep out of reach of children.
Avoid inhalation of dust and contact with eyes. Keep away
from excessive heat, sparks and open flames.
Precautions for Storage:
Keep out of reach of children.
Keep container closed. Store at room temperature. Keep
away from strong oxidizers.
Other Precautions:
None.
Shipping Information
Special Shipping Information: Non hazardous.
UN Number:
None.
Hazards Class
: None.
User’s Responsibility________________
This bulletin cannot cover all possible situations which the user
may experience when using this product. Each aspect of your
operation must be examined in regard to if, or where,
additional precautions may be necessary. All health and safety
information contained in this bulletin must be provided to your
employees or customers. It is your responsibility to use this
information to develop appropriate work practice guidelines
and employee instructional programs for your operation.
Preparation Date of MSDS ____________
Date:
October 1, 2007.
Prepared by:
Oki Data Americas, Inc
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
http://www.okiprintingsolutions.com
my.okidata.com
To Next Page
Loading...
Need help?
Performance
Memory
Power
Weight and Dimensions
