Chapter 5 Functions
97
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Figure 5.45
• When this instrument is turned ON, the enhancement mode
used in the last operation before the instrument is turned
OFF comes up when the instrument is turned ON.
• The image enhancement mode selection operation can also
be controlled from the scope switches and/or foot switches.
For how to set up the scope switches and foot switches, see
“Remote switch and foot switch (EXERA and VISERA)” on
page 219.
White balance adjustment (“Shift” + “F9”)
White balance is an adjustment function to display the appropriate color of the
image on the monitor. The operation of these two keys is the same as the “Wh/B”
button on the front panel. See Section 4.5, “White balance adjustment” on
page 52.
Figure 5.46
The white balance adjustment can also be initiated from the
scope switches and/or foot switches. For how to set up the
scope switches and foot switches, see “Remote switch and
foot switch (EXERA and VISERA)” on page 219.
To Next Page
Loading...
Need help?
General
