50
EN
Shooting
2
Zoom frame AF/zoom AF (Super Spot AF)
You can zoom in on a portion of the frame when adjusting focus. Choosing a high
zoom ratio allows you to use autofocus to focus on a smaller area than is normally
covered by the AF target. You can also position the focus target more precisely.
01:02:0301:02:03
3030
250250 F5.6
0.00.0
L
N
S-IS AUTO
S-IS AUTO
ISO-A
200
FullHD
F
Wi-Fi
Shooting display
01:02:0301:02:03
3030
250250 F5.6
0.0
0.0
L
N
S-IS AUTO S-IS AUTO
ISO-A
200
FullHD
F
Off
Wi-Fi
Zoom frame AF Zoom AF
U
U
U
U (Press and hold) / Q
1
Pre-assign a (zoom icon) to one of the buttons using [Button Function] (P. 66).
2
Press the U button to display the zoom frame.
• If the camera was focused using autofocus just before the button was pressed, the
zoom frame will be displayed at the current focus position.
• Use FGHI to position the zoom frame.
• Press the INFO button and use FG to choose the zoom ratio. (×3, ×5, ×7, ×10,
×14)
3
Press the U button again to zoom in on the zoom frame.
• Use FGHI to position the zoom frame.
• You can change the zoom ratio by rotating the front dial (r) or rear dial (o).
4
Press the shutter button halfway to initiate autofocus.
• The camera will focus using the subject in the frame at the center of the screen. To
change the focus position, move it by touching the screen.
$ Notes
• You can also display and move the zoom frame using touch screen operations.
Cautions
• Zoom is visible only in the monitor and has no effect on the resulting photographs.
• When you are using a Four Thirds system lens, the AF will not operate with during zoom
display.
• While zoomed in, a sound is made by the IS (Image Stabilizer).
To Next Page
Loading...
Need help?
General
