Camera Underwater Housing – E-PL1 (Olympus)
User Manual
Contents:
1. Introduction
2. Specifications
3. Function Controls
4. Set up Instructions
5. Use & Care of Housing
6. Service
7. Warranty
1. Introduction
Made of 6061 aluminum, 10Bar Housing is a sturdy choice for the Olympus E-PL1 camera. For
those who favour small cameras, it is the ideal housing, equipped with full-function control buttons,
flash window for lighting and external flash synchronization and interchangeable ports for various
Micro Four Third and conversion lens to suit their needs. The acrylic back cover allows taking
pictures and checking on the camera much easier. For closure, the double o-rings and key-hole
lock design provide ease of use and added security. Now you can use small cameras with the feel
and function of professional housings.
2. Specifications
Test Pressure
Housings individually tested to 10 Bar (90 m / 300 ft.) Recommended
working pressure 60 m
Closure Design Double O-rings, Key-hole Lock
Body Material 6061 Aluminum, Acrylic
Overall Size 185 x 171 x 146mm (L x W x H)
Total Weight Approximately 1.5kg (Housing with ZOOM port only)
Buoyancy (with camera)
Slightly negative in salt water
Accessories
Spare main O-rings ( included)
Silicone O-ring grease ( included)
Carrying bag ( included)
Red/Magenta filter (optional)
Macro and Wide Angle conversion lens (optional)
To Next Page
Need help?
General
